Can i use different brand rams

If you have two sticks with two different frequencies, you should make sure to put the slowest RAM in the lowest numbered memory slot there are small numbers near each slot on the motherboard. The final thing that you should look at when it comes to ensuring maximum compatibility between your RAM sticks is for them to be of the same size. The best option that you have when it comes to upgrading your RAM and getting a new stick is buying an identical one with what you have.

But different brand RAM sticks can still work together, as long as you tick all the boxes above. As long as the stick fits on your motherboard, it will work. I am using different brands and even different spec RAM sticks on many computers and never had major problems with them. This site uses Akismet to reduce spam. Learn how your comment data is processed. But what do they mean? So, the HyperX Fury Black kit can perform 3.

Generally, the more cycles per second a RAM module can perform, the faster it is. Sometimes a RAM module with a lower frequency but a very fast response time perform better than a high-frequency module with a very high CAS. When you mix RAM modules with different speeds, your computer will most likely run just fine, but it will perform to the speed of the slower RAM module by adjusting its frequency, timing, and voltage.

Instead, it passes information through the so-called memory controller, which has two bit total bit channels at least on most motherboards. If you buy a RAM kit that consists of two identical RAM sticks, your computer will almost certainly automatically default to a dual-channel configuration, essentially doubling the memory bandwidth.

If you add a mismatched RAM stick, it will run in the single-channel asymmetric mode , which provides single-channel bandwidth and uses the slowest supported memory timing.

Another factor to look for is the CAS Latency of your ram module. CAS or Column Address Strobe is related to the number of cycles it takes for a ram module to access in one of its columns. Ram modules from different brands can have a minute difference in CAS Latency and voltage even if they look similar. You can mix ram with a different clock speed. However, your motherboard will automatically underclock the ram module with a higher clock speed to match with the one with a lower clock speed.

Combining ram from different brands and clock speeds could results in errors as well. If you are using an older motherboard, then you can witness BSOD errors and frequent crashes. This often happens when your pair an older ram module with a new one.

Also, read about the Best Ram for Gaming Laptops.